Chemical products for thermo / hydro / wind / solar power plants - CLARUS Technology

Chemical products for thermo / hydro / wind / solar power plants

The CLARUS® Technology eco-friendly chemical solutions for Thermoelectric, Hydroelectric, Wind and Solar power plants include products developed to provide high performance, while being biodegradable, eco-friendly and renewable. They are ideal for applications where there is a risk of spilling on the ground, in water and other locations, preventing environmental contamination.

Highlights of the line:

  • Greases for equipment and turbines of hydroelectric and thermoelectric power plants, developed to operate in extreme conditions of temperature and pressure, with high levels of contaminants, providing the ideal lubricity for the operation;
  • Special greases for wind power plants, developed considering the great demands of the turbines, the high level of lubrication required, and the environmental challenges to which they are subjected;
  • Greases for bearings and gears, hydraulic systems and generators;
  • Solvents for cleaning and dielectric protection
  • Water treatment products.
  • Solar panel cleaners

See the solutions for each application area. For a specific product recommendation for your needs, request the technical data sheet or consult our specialists.

Chemical Products Recommended for this Sector

The items below comprise a selection of products commonly used in this sector. For the best solution for your needs, please consult our specialists.

Industrial Antifoams

Electro-Electronic Cleaners and Protectors

Dielectric Solvents


Industrial Antifoams

Industrial Antifoams

Product Features Applications Video
CLARUS AquaMax ANS-30

Non-flammable antifoam for industrial processes

Antifoam specially designed to inhibit and eliminate foam in the process. ▪ Non-Flammable. ▪ Biodegradable. ▪ Water soluble. ▪ Can be used with any type of liquid. ▪ Has biodegradability report. ▪ Ideal for application in solvent-based degreasers in industrial processes, paints in spray booths (water-based or solvent-based), fermentation processes (alcoholic or not), effluent treatment systems (industrial, sewage, WWTPs, sludge, etc.) and with machining fluids (neat, soluble, vegetable, mineral, or synthetic). ▪ Prevents frequently occurring inconveniences. ▪ Ideal for systems where daily water change is not desirable. ▪ Not aggressive to tank and equipment materials.

Electro-Electronic Cleaners and Protectors

Electro-Electronic Cleaners and Protectors

Product Features Applications Video
Katronix 11c

• Electronic Contact Cleaner
• Non-flammable, volatile, not unhealthy
• Mild odor and controlled evaporation
• Fluorinated base
• Without flash point (greater operational safety)
• Non-corrosive and non-conductive
• Drying cleaning
• Not controlled, not unhealthy, non-toxic (meets NR-15)
• Non-flammable (meets NR-16 and NR-20)

• Cleaning and dewatering of electronic boards
• Removal of oil, grease and flux
• Stencil Cleaning
• Cleaning of optical fibers, IC boards, PLCs, computers
• Cleaning of metal connectors, contacts, semiconductors
• Use in metrology, laboratories, instrumentation, automation
• Cleaning of electrical substations
• Removal of hard-to-remove contaminants

Dielectric Solvents

Dielectric Solvents

Product Features Applications Video
ElectryMax SDL-17

Slow evaporation dielectric solvent (Controlled Drying)
Kerosene substitute
Non-flammable (NR-16 and 20)
Dielectric strength of 30,000 V
• High cleaning power
• Does not attack materials (varnish, metals, painted surfaces, plastics and rubbers in general)

Degreasing and cleaning of electric motors
Cleaning of windings and generators
• Cleaning of casings and bearings
• Cleaning of mechanical parts and machines

ElectryMax SDL-17i
  • Slow evaporation dielectric solvent
  • Odorless Kerosene substitute
  • Non-flammable (NR-16 and 20)
  • Dielectric strength of 25,000 V
  • Not unhealthy, non-toxic (NR-15)
  • Does not attack materials
  • Degreasing and cleaning of electric motors
  • Cleaning of windings and generators
  • Cleaning of casings and bearings
  • Cleaning of mechanical parts and machines
ElectryMax SDR-17

Fast evaporation dielectric solvent
Kerosene substitute
Non-flammable (NR-16 and 20)
Dielectric strength of 30,000 V
• Can be used on running equipment
• Does not attack materials (varnish, metals, painted surfaces, plastics and rubbers in general)

Degreasing and cleaning of electric motors
Cleaning of windings and generators
• Cleaning of casings and bearings
Ideal for emergencies
Dewatering of flooding in centrifugal pump houses

How can we help?

Get in touch with our specialists for the best solution.

Contact us