Eco-friendly penetrating oils with high performance in aerosol, non-toxic, low odor and odorless. Non-flammable options available. Replace conventional market products that are aggressive, unhealthy and have masked odor, mineral spirits, benzine, ether, isopropyl alcohol (IPA), MEK, acetone, perchloroethylene, naphtha, hexane, pentane, aromatics (toluene, xylene, etc.), thinners and aromas.
Multiprocess Penetrating and Lubricating Oil. Odorless. Non-toxic. Biodegradable. Non-conductive. Free of chlorinated and aromatic compounds. Ideal for maintenance, assemblies, processes and metrology. Ideal for facilitating the removal of oxides or the rust layer normally found on metal surfaces, removing stuck screws and nuts, and general maintenance. In accordance with FDA (Food and Drug Administration) 21CFR178.3530 and 21CFR172.882 classifications. Ideal for: metrology and automation laboratories for cleaning standards, equipment and tools; corrective and preventive maintenance in the production area and tool protection; general use as an anti-corrosion protector and part penetrant; automotive and transport market in general (vehicles, conveyor belts, etc.); temporary protection of atmospheric corrosion of plates and metal parts; maintenance lubrication: equipment, tools, fasteners, locks, hinges and weapons. Has biodegradability, non-skin irritability and non-toxicity reports. Free of aromatics. Not controlled. Not unhealthy. Non-toxic (meets NR-15).
CLARUS Technology offers products of high quality standards within its general terms of sale and delivery. The instructions and methods described here are based on current data and reflect supplier information and practices known to CLARUS Technology. Any statements or methods mentioned by CLARUS Technology's technical support, whether verbal, written, or through testing, are general suggestions, given in good faith, but must not be interpreted as representations or warranties regarding safety, performance, or results, including when the property rights of third parties are involved. The suitability and performance of the product are highly dependent on the processes, operations, and numerous other conditions to which it is subjected by the user; therefore, the user must assume all responsibility and risk arising from determining whether the product is appropriate or not for the purpose to which it is intended. No other test, suggestion, or data provided by CLARUS Technology shall relieve the user of this responsibility. However, if it is necessary to establish liability for any damage, it is limited to the value of the products supplied by CLARUS Technology and used by you.
CLARUS® Technology is a registered trademark of KELPIE-BR® Gestão Empresarial Ltda. Copyright ©2026. All rights reserved. Privacy Policy
To get started, please provide your WhatsApp number: