Special release agents for Glass, Ceramics and Refractories.
Glass: For simple press formations, for pressure and temperature injection molds, including coatings for rotary blow molds, moldings and mold preparation, mouthpieces, conveyor belts, plate bases and related equipment. They promote better finish and workability. They are special products for pre-treatments of molds used in the glass industry, which promote optimized demolding, with high durability and high thermal resistance, preventing the adhesion of glass to the mold and promoting excellent distribution of glass with consistent quality throughout the process. Enables cost reduction with fewer stops for mold cleaning.
Refractories: The line for demolding ceramics and refractories includes a range of water-based (sustainable) and neat products with or without rapid evaporation. On refractories (sanitary ware) after molding and drying, apply crack developer and correct flaws before glazing.
• Technical grade silicone• High chemical stability• Effective from -40°C to 260°C• Deposits semi-dry and protective film• Repels water and reduces friction• Anti-corrosion action• Without addition of Vaseline, Mineral or Vegetable Oils• Not controlled, not unhealthy (NR-15)
• Lubricant, release agent, non-stick and protective• Ideal for molds, dies and presses• Protection at elevated temperatures• Replaces common oils
• Technical grade silicone• High chemical stability• Semi-dry lubrication• Effective from -40°C to 260°C• Repels water and reduces friction• Prolonged anti-corrosion action• Does not attack metals, plastics and electro-electronic components• Without addition of Vaseline, Mineral or Vegetable Oils• Meets NR-15
• Lubricant, release agent, non-stick and protective• Ideal for molds, dies and presses• Use in food and pharmaceutical industries• Lubrication of belts, guides, pulleys, bearings, shafts,valves, locks, bushings, control cables and circular belts• Non-stick for heated or non-heated surfaces• Dewatering action• Prevention of failures in electrical circuits• Anti-paint mask
CLARUS Technology offers products of high quality standards within its general terms of sale and delivery. The instructions and methods described here are based on current data and reflect supplier information and practices known to CLARUS Technology. Any statements or methods mentioned by CLARUS Technology's technical support, whether verbal, written, or through testing, are general suggestions, given in good faith, but must not be interpreted as representations or warranties regarding safety, performance, or results, including when the property rights of third parties are involved. The suitability and performance of the product are highly dependent on the processes, operations, and numerous other conditions to which it is subjected by the user; therefore, the user must assume all responsibility and risk arising from determining whether the product is appropriate or not for the purpose to which it is intended. No other test, suggestion, or data provided by CLARUS Technology shall relieve the user of this responsibility. However, if it is necessary to establish liability for any damage, it is limited to the value of the products supplied by CLARUS Technology and used by you.
CLARUS® Technology is a registered trademark of KELPIE-BR® Gestão Empresarial Ltda. Copyright ©2026. All rights reserved. Privacy Policy
To get started, please provide your WhatsApp number: