The line of release agents for rubbers and elastomers features semi-permanent action products to reduce the need for reapplication of release agents in each cycle, increasing productivity and part quality. They also help reduce the appearance of scale and residue buildup, leaving final products free of residues and ready for secondary operations. Ideal for injection/injection-transfer, transfer and compression molding processes with water-based and solvent-based release agents.
• Technical grade silicone• High chemical stability• Effective from -40°C to 260°C• Deposits semi-dry and protective film• Repels water and reduces friction• Anti-corrosion action• Without addition of Vaseline, Mineral or Vegetable Oils• Not controlled, not unhealthy (NR-15)
• Lubricant, release agent, non-stick and protective• Ideal for molds, dies and presses• Protection at elevated temperatures• Replaces common oils
• Polymeric base release agent and non-stick• Does not attack metals, plastics and electro-electronic components• Excellent dewatering action• Repels water and reduces friction• Not controlled, not unhealthy, non-toxic and odorless (meets NR-15)• Without addition of Vaseline, Mineral or Vegetable Oils
• Ideal for molds, dies, presses• Application inside freezers and refrigerators• Non-stick for heated or non-heated surfaces• Use in hot jaws for closing packaging• Provides high level of protection at elevated temperatures
• Technical grade silicone• High chemical stability• Semi-dry lubrication• Effective from -40°C to 260°C• Repels water and reduces friction• Prolonged anti-corrosion action• Does not attack metals, plastics and electro-electronic components• Without addition of Vaseline, Mineral or Vegetable Oils• Meets NR-15
• Lubricant, release agent, non-stick and protective• Ideal for molds, dies and presses• Use in food and pharmaceutical industries• Lubrication of belts, guides, pulleys, bearings, shafts,valves, locks, bushings, control cables and circular belts• Non-stick for heated or non-heated surfaces• Dewatering action• Prevention of failures in electrical circuits• Anti-paint mask
CLARUS Technology offers products of high quality standards within its general terms of sale and delivery. The instructions and methods described here are based on current data and reflect supplier information and practices known to CLARUS Technology. Any statements or methods mentioned by CLARUS Technology's technical support, whether verbal, written, or through testing, are general suggestions, given in good faith, but must not be interpreted as representations or warranties regarding safety, performance, or results, including when the property rights of third parties are involved. The suitability and performance of the product are highly dependent on the processes, operations, and numerous other conditions to which it is subjected by the user; therefore, the user must assume all responsibility and risk arising from determining whether the product is appropriate or not for the purpose to which it is intended. No other test, suggestion, or data provided by CLARUS Technology shall relieve the user of this responsibility. However, if it is necessary to establish liability for any damage, it is limited to the value of the products supplied by CLARUS Technology and used by you.
CLARUS® Technology is a registered trademark of KELPIE-BR® Gestão Empresarial Ltda. Copyright ©2026. All rights reserved. Privacy Policy
To get started, please provide your WhatsApp number: